Play(Record); Change Status - Tascam DV-RA1000HD Specification

Sample 4: Get the status of the controlled device then go to next operation
The controlled device sends the CHANGE STATUS when the machine status is changed.
This CHANGE STATUS command is useful for checking the current machine status by using the
MECHA STATUS SENSE command.
This example describes that checks the Record Ready status then starts recording.
External controller
RECORD (Record Ready)
MECHA STATUS SENSE

PLAY(Record)

Command
Controlled device
->

CHANGE STATUS

<-
->
MECHA STATUS RETURN
<-
->
CHANGE STATUS
<-
TASCAM DV-RA1000 RS-232C プロトコル仕様書
Status of the controlled device
STOP
Send the CHANGE STATUS
return command
Send the Record Ready status
Send the CHANGE STATUS
return command
6
ティアック株式会社