Tascam DV-RA1000HD Specification page 10

4-10. PITCH CONTROL DATA PRESET
Sets the Pitch Control value from –6.0% to +6.0% in 0.1% steps.
When this command is transmitted with request data ([FF]), the controlled device returns the PITCH
CONTROL DATA RETURN command [A5].
The pitch control function is turned on and off using the PITCH CONTROL SELECT command [35].
Command
Data
Return
Data 1 Data 2
N2 N3
F F
・ If the specified data is out of range, the controlled device sends ILLEGAL [F2].
4-11. CLOCK DATA PRESET
Sets the date and time.
Command
Data
Return
Description
Data 1
Tens digit of Christian era
Data 2 Units digit of Christian era
Data 3 Tens digit of months
Data 4 Units digit of months
Data 5 Tens digit of days
Data 6 Units digit of days
Data 7 Tens digit of hours
Data 8 Units digit of hours
Data 9 Tens digit of minutes
Data 10 Units digit of minutes
・ If the specified data (date or time) does not exist, the controlled device sends ILLEGAL [F2].
25
4 bytes or 2 bytes
PITCH CONTROL DATA RETURN [A5]
Data 3 Data 4 Description
0
1
N1
Preset %
... Pitch Control
value request
27
2 bytes or 10 bytes
CLOCK DATA PRESET RETURN [A7]
TASCAM DV-RA1000 RS-232C プロトコル仕様書
Remarks
Positive (+) value
Negative (-) value
N1: Tens of pitch control value
N2: Units of pitch control value
st
N3: 1 decimal of pitch control value
[Sample] 2010: -2.0%
Requests the currently set the Pitch
Control value
Remarks
If both Data 1and 2 are F, sends the
clock data currently set
9
ティアック株式会社