Tascam DV-RA1000HD Specification page 11

4-12. TIME SEARCH PRESET
Locates to the specified track and time in minutes and seconds. If the controlled device is in stop or play
mode, playback will start at the specified time. If the controlled device is in ready mode, the playback
position will move to the specified time, and the controlled device will enter ready mode there. The time
specified must be a valid time (e.g. the track must exist on the disc).
Command
Data
Return
Description
Data 1
Tens digit of track number
Data 2 Units digit of track number
Data 3 Thousands digit of track number
Data 4 Hundreds digit of track number
Data 5 Tens digit of minutes
Data 6 Units digit of minutes
Data 7 Thousands digit of minutes
Data 8 Hundreds digit of minutes
Data 9 Tens digit of seconds
Data 10 Units digit of seconds
Data 11 Tens digit of frames
Data 12 Units digit of frames
・ If the specified data (Track number and time) does not exist on the disc, the controlled device sends
ILLEGAL [F2].
4-13. FADE IN/OUT TIME PRESET
Sets the fade in and out time.
When this command is transmitted with request data ([00FF] or [01FF]), the controlled device returns the
FADE IN/OUT TIME RETURN command [AE].
The FADE mode is turned on and off using the FADE IN/OUT SELECT command [3E].
Command
Data
Return
内容
Data1 00: FADE IN setting
01: FADE OUT setting
Data2
st
Data3 1 decimal digit of Fade In/Out time
nd
Data4 2 decimal digit of Fade In/Out time
Data5 Tens digit of the Fade In/Out time
Data6 Units digit of the Fade In/Out time
・ If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
・ If the specified data is out of range, the controlled device sends ILLEGAL [F2].
2C
12 bytes
None
2E
4 bytes
FADE IN/OUT TIME RETURN [AE]
10
TASCAM DV-RA1000 RS-232C プロトコル仕様書
Remarks
[Sample]
020003001030: 2tr 03m 10s 30f
Frame search can be done for DVD/HDD
only
備考
FF
ティアック株式会社