Table of Contents
Advertisement
Scanning the server for viruses
6.2. Setting up a task
The parameters that the application will use when executing a task depend on
the task settings. Task parameters can be set up regardless of whether the
program is running on the server or not.
To set up the update task parameters, do the following:
1.
In the Kaspersky Anti-Virus 5 name space in the console tree
select the server that you wish to scan.
2.
Expand the task types list and select On-demand Scan/ Real-
Time Protection.
3.
Open the list of the created tasks of the desired type and select the
one for which you want to set up parameters.
4.
Open the shortcut menu and select the Properties item.
This will open the task properties window On-Demand Scan (<Server name>):
<Task name> / Real-Time Protection (<Server name>): <Task name>. This
window has several tabs (see Figure 21), each containing parameters related to
a certain part of the application's functions. The values of most of the parameters
are set automatically or depending on the values stored in the template task.
Please familiarize yourself with the information provided on the tabs and change
or add to it if necessary.
You can take the following actions:
•
Specify regions for scanning, file types to be scanned, regions to be
excluded from scanning, and activate advanced scanning modes, namely:
scan by wildcard, archive scanning, packed executables scanning and
use of heuristic code analyzer. This can be done on the Scan settings
tab (see Figure 21) (for more details please refer to section B.2.1below
139).
•
Specify actions to be applied to infected or suspicious files if these
detected, as well as actions to be applied to a workstation that attempts to
store an infected object on the server. This can be done on the Actions
tab (for more details please refer to section B.2.2below 144).
•
Specify the location of the log file that will contain detailed information
about the results of the task execution, set the log file size and specify the
events to be logged. This can be done on the Event log tab (for more
details please refer to section B.2.3 on page 146).
51
Advertisement
Table of Contents
