Setting Up The Application - KAPERSKY ANTI-VIRUS 5.7 - FOR NOVELL NETWARE Administrator's Manual

Setting up the application

You can start / stop the Kaspersky Anti-Virus and Anti-virus database
updating modules, and load / unload additional antiviral engines directly from
the server command line using the following commands:
•
LOAD SYS:\KAV\KAV.NLM – start Kaspersky Anti-Virus module
•
KAVSCH5/.NCF – start Anti-virus database updating module
•
UNLOAD KAV.NLM – stop Kaspersky Anti-Virus module
•
UKAVSCH5.NCF – stop Anti-virus database updating module
•
LOAD
SYS:\KAV\KAVSCAN.NLM – load additional N
•
UNLOAD ADDRESS SPASE=KAV(N) – unload additional N
viral engine.
4.5. Setting up the application
After installation, Kaspersky Anti-Virus begins working with the minimal number
of settings, most of which are set by default.
We recommend that after starting the application you familiarize yourself with its
options and, if necessary, change the settings as required. These parameters
are common for all the task types of this server and cannot be changed at the
moment of creating a task.
The application is set up from a workstation or a server on which the Snapin for
Novell ConsoleOne or the Web management module is installed. Individual
windows are used for each server. This operation can be carried out regardless
of whether the application is running on the server or not.
To open the application setup window,
select the required server in Kaspersky Anti-Virus 5 name space in the
console tree. Open the shortcut menu and select the Properties... item.
The Kaspersky Anti-Virus 5.7 on <server name> window will be displayed
(see Figure 11). The tabs are described in detail in Appendix A on p.112.
ADDRESS SPASE=KAV(N)
th
antiviral engine
33
RESTART
th
anti-