KAPERSKY ANTI-VIRUS 5.7 - FOR NOVELL NETWARE Administrator's Manual page 45

Updating the anti-virus database
6. This will open the Edit window (see Figure 19). Using the tabs in
this window, you can customize settings for the task selected in the
previous window. To apply these settings to the whole batch of
tasks check the Save group settings checkbox in the lower part of
the window on each of the tabs.
In Web management module to perform group settings you need to
check the box on settings tab header.
After this, those fields on the tabs become available for editing, and their
values can be set the same for the whole batch of tasks. Make the
desired changes and click on Apply or OK to save the settings.
As a result, the settings you have made will be saved for the whole batch
of tasks. A common log will be shared by these tasks. You can change
the tasks schedule on the Schedule tab individually for each task.
Figure 19. The Change task settings window. Batch task setup
Figure 18. The Select task template window
45