KAPERSKY ANTI-VIRUS 5.7 - FOR NOVELL NETWARE Administrator's Manual page 53

Scanning the server for viruses
To set up the task in the application setup window, do the following:
1. Select the required server in the Kaspersky Anti-Virus 5 name
space in the console tree. Open the shortcut menu and select the
Properties item.
2. In the new window, Kaspersky Anti-Virus on <Server name>,
select the Task tab (see Figure 14).
3. Select the mode for reviewing the Real-Time Protection and On-
demand Scan tasks – On-demand scan and real-time protection
tasks.
4. In the list of tasks created for the server select the one you wish to
set up. Click on the Edit button located in the group of buttons on
the right.
5. This will open the Edit window (see Figure 22), with the tabs: Scan
settings, Actions, Event log, NW-notification and E-mail
notification. These tabs are exactly the same as those in the task
setup window On-Demand Scan (<Server name>):<Task name>
/ Real-Time Protection (<Server name>):<Task name>. Make all
the desired changes and click on Apply or OK to save the settings.
6. Now it is necessary to schedule the task start. In the window
Kaspersky Anti-Virus 5.6 on <Server name> select the
Schedule tab.
7. Select the mode for reviewing the Real-Time Protection and On-
demand Scan tasks – On-demand scan and real-time protection
task schedule.
8. Click on the Add button at the right side of the schedule.
9. In the Create new schedule for the task (see Figure 23) dialog
box select the task you want to schedule and specify the
parameters of its start (see section A.4 on page 116). The task is
selected from the list in the left part of the window. The start
parameters setting procedure is exactly the same as the one
described above. After finishing, click OK.
53