KAPERSKY ANTI-VIRUS 5.7 - FOR NOVELL NETWARE Administrator's Manual page 63

Generating and viewing logs, receiving notifications
section B.2.3 on page 146) and the activated filter. By default, the information
about the anti-virus database updating results is displayed.
The information is output at 100 lines per page, and the lines are numbered. The
Total Records field displays the total number of records. To navigate through
the log records you can use the navigation buttons located above and below the
table.
To facilitate viewing and searching the information, the program offers the
opportunity to set up user filters. The filters allow searching and discarding of
currently unnecessary information when it complicates viewing. After the filter is
applied, only that information that meets the requirements of the filter is
displayed. This has great importance since the log stores large volumes of
information.
To set up the filter for the information displayed in the table, do the following:
1. Check the boxes corresponding to the information to be displayed
in the table:
•
•
•
•
•
•
•
You can check all the boxes using the Select All button, or uncheck
all the boxes using the Clear button.
2. In order to refresh the information in the table click on the Apply
button.
Using the Parameters hyperlink you can view the task settings that were to be
used during this session. This will open the task settings window (see Figure 27),
which displays the following information:
Updating results – information regarding the results of the
server anti-virus database update download (this box is
checked by default).
Updating source – information regarding the results of
connection to the update source.
Backup before updating – whether the backup copy of the
previous version of the anti-virus database was created before
updating.
Not changed files – information regarding the anti-virus
database files that were not modified.
Successfully downloaded files – information regarding
successfully updated anti-virus database.
Deleted files – information regarding the deleted files.
Errors – information about errors in the event that the update
fails.
63