DSC PC 4020 - V3.0 Manual page 13

Table 2-1: Access Code User Options
System Master
Select this option to program a System Master Code
Supervisor
Select this option to program a Supervisor code. You must
also
program the partition mask for this code.
Arm
Allows arming of the
Disarm
Allows disarming of the
Bypass
Allows bypassing of zones on the
Command Output
Allows activation of a [*][7][X] command output when an
access code is required. For more information, ask your
installer.
Duress Pulse
Select option for Duress codes only (See "Special Codes")
One-Time Use
Select option for One-Time Use codes only (see "Special
Codes")
Escort4580 Access
Allows access to the Escort4580 Audio Assistant, if
installed.
Global Access
Allows use of a Global keypad.
Partition Select Menu
Allows all accessible partitions to be viewed when the
code is entered.
Card Valid (For Access Control Systems only. See Section
4.2 "Access Card Programming"
Privilege Card (same as previous)
Wait for Prvl (same as previous)
Silence Fire
Allows the user to silence and reset any Fire Alarms on the
selected partitions by entering their access code on the
partition keypad.
* Code abbreviations: GM = Grand System Master; 2M = Second Master;
SM = System Master; S = Supervisor; AC = Access Code (default).
The options for the Grand System Master and Second Master codes cannot be changed
from their default settings.
For the System Master code, the supervisor option changes to Yes after you exit access
code programming.
partition(s).
assigned
partition(s).
assigned
assigned
)
S e c t i o n
GM 2M SM
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
partition(s).
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes
Yes Yes Yes Yes Yes
2 : A c c e s s C o d e s
Default Settings*
S AC
Yes
Yes
Y es
13