Compaq ProLiant 8000 Maintenance And Service Manual page 57

2-40 Compaq ProLiant 8000 Servers Maintenance and Service Guide
4. Rotate the ejector levers outward
slide the board out of the server
Figure 2-34. Removing the memory expansion board
Reverse steps 1 through 4 to replace the memory expansion board.
IMPORTANT: When installing a memory expansion board, verify that the board aligns with the
connectors on the processor board. If the memory expansion board is not properly seated, the system
interlock circuitry prevents the system from powering up.
IMPORTANT: Secure the thumbscrews in order for the unit to operate properly. See the warning label on
the processor board cage for the service screw locations.
NOTE: Remember to remove any memory modules from the replaced memory expansion board and
insert them into the proper sockets on the new memory expansion board.
on each side of the memory expansion board. Then

.

4
4
5