Configuring Virtual Media Remotely; Enabling/Disabling Virtual Media Using The On-Board Web Interface - Dell PowerEdge 180AS User Manual

To set virtual media options using the OSCAR interface:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Connect a virtual media device to the USB port on the switch.
3 Click VMedia.
4 Click the appropriate checkbox to enable or disable each of the options.
For information about each individual setting, see Table 6-1.
5 Click OK to accept the options you have selected and return to the Main
dialog box.

Configuring Virtual Media Remotely

Virtual media can also be configured using the on-board web interface. The
on-board web interface includes options similar to those in the OSCAR
interface. Users can enable or disable virtual media on any server on a per SIP
basis. This control is also maintained in the appliance after a power cycle.

Enabling/Disabling Virtual Media Using the On-board Web Interface

The on-board web interface virtual media configuration screen displays the
EID, name, and connection path of each virtual media SIP , as well as a check
box that controls whether virtual media is enabled or disabled for that
individual SIP .
133
Virtual Media