Rdp Options - Dell PowerEdge 180AS User Manual

1 Select Tools - Options from the Remote Console Switch Software
Explorer menu. The Options dialog box appears.
2 Click the VNC tab.
3 In the Application to Launch field, enter the directory path and name or
click the Browse button to locate the path and name.
4 Enter command-line arguments in the box below the path and name.
- or -
To insert a predefined macro at the cursor location in the command-line,
click the Insert Macro list box and select a macro from the drop-down
menu. The Remote Console Switch Software will automatically replace
these variables when the application runs.
5 Enable/disable the Launch in command window checkbox. When
enabled, the user-specified VNC application will be launched from within
an OS command window.
6 Click OK.

RDP options

The Remote Console Switch Software supports user-defined RDP viewers via
the properties page. In the RDP tabs you can search for a user-specific RDP
application and you may include its command-line arguments. A selection of
macros is available for placement in the command-line; this may be useful for
automatic replacement of variables such as IP address, port number, user
name and password. For RDP commands that do not provide their own GUI,
such as those for standard Windows, Linux and UNIX, you may have the
RDP application launch from within an OS command window.
To change RDP options:
1 Select Tools - Options from the Remote Console Switch Software
Explorer menu. The Options dialog box appears.
2 Click the RDP tab.
3 In the Application to Launch field, enter the directory path and name or
click the Browse button to locate the path and name.
4 Enter command-line arguments in the box below the path and name.
- or -
Remote Console Switch Software Basic Operations
92