Dell PowerEdge 180AS User Manual page 178

Figure 7-15. Upgrade SIP Firmware Window
4 Click Upgrade. The Upgrade button dims. The Last Status column will
display either In Progress or Succeeded, depending on the status of each
SIP upgrade. A firmware upgrade currently in progress message displays
until all of the selected SIP types are upgraded.
5 When complete, a message appears prompting you to confirm the upgrade
completion. Once confirmed, the Upgrade button is again enabled.
6 Click Close to exit the Upgrade Firmware window.
To upgrade SIP firmware individually:
1 Click the Configure tab in the on-board web interface.
2 Select the SIPs sub-category under Versions in the left column.
3 Click the EID of the SIP for which you wish to view firmware information.
The SIP Version window opens.
161
Managing Your Remote Console Switch Using the On-board Web Interface