Dell PowerEdge 180AS User Manual page 217

Figure 9-7. Setting Up Active Directory Objects in a Single Domain
User1
To set up the objects for the single domain scenario, perform the following
tasks:
1 Create two Association Objects.
2 Create two RCS Device Objects, RCS1 and RCS2, to represent the two
Remote Console Switches.
3 Create two Privilege Objects, Priv1 and Priv2, in which Priv1 has all
privileges (administrator) and Priv2 has login privileges.
4 Group user1 and user2 into Group1.
5 Add Group1 as Members in Association Object 1 (AO1), Priv1 as Privilege
Objects in AO1, and RCS1 and RCS2 as RCS Devices in AO1.
6 Add user3 as Members in Association Object 2 (AO2), Priv2 as Privilege
Objects in AO2, and RCS2 as RCS Devices in AO2.
See "Adding Remote Console Switch Users and Privileges to Active Directory
with Dell Schema Extensions" for detailed instructions.
Figure 9-8 shows how you can set up the Active Directory Objects in multiple
domains. In this scenario, you have two Remote Console Switches (RCS1 and
RCS2) and three existing Active Directory users (user1, user2, and user3).
AO1
Group1 Prvi1
User2
User3
LDAP Feature for the Remote Console Switch
AO2
RCS1 RCS2
Priv2
200