Changing Server Network Properties - Dell PowerEdge 180AS User Manual

7 Click Apply to save the new settings.
-or-
Click OK to save the new settings and close the Properties window.
-or-
Click Cancel to exit without saving the new settings.

Changing Server Network Properties

The Network tab lets you set a browser URL for that server if you want to
launch a browser to the server's web server instead of launching a Viewer
session.
To change network properties:
1 In the Remote Console Switch Software, click the Server tab and then
select an individual server in the Unit Selector list.
2 Select View - Properties from the Explorer menu.
-or-
Click the Properties task button.
-or-
Right-click the unit and select Properties. The Properties dialog box
appears.
3 Click the Network tab and type the URL you want to use when
establishing a browser connection to the server. If the field contains a
value, then the Browser button appears in the task bar allowing you to
launch the browser to that specified URL.
Remote Console Switch Software Basic Operations
80