Switch after an firmware upgrade. SIPs that have already been discovered but
which are not attached to the Remote Console Switch during the firmware upgrade
must be upgraded manually.
Figure E-2. SIP Status Dialog Box
3 Click one or more types of modules to upgrade. Click Upgrade.
4 The SIP Upgrade dialog box displays. Click OK to initiate the upgrade
and return to the SIP Status dialog box.
To upgrade SIP module firmware individually:
1 Press <Print Screen>
2 Click Commands - Display Versions. The Version dialog box displays.
Figure E-3. Version Dialog Box
251
Appendix E: FLASH Upgrades
The Main dialog box will appear.
.