Figure 1-6. Installing The Versarails Rail Assemblies - Dell PowerEdge 1800 Hardware Installation Manual

3
At the back of the cabinet, pull back on the mounting-bracket flange until the mounting
holes align with their respective holes on the back vertical rail.
4
Install two 10-32 x 0.5-inch flange-head Phillips screws in the back mounting flange's first
and third holes to secure the slide assembly to the back vertical rail.
5
Repeat steps 1 through 4 for the slide assembly on the other side of the rack.
NOTE:
Ensure that the rails are mounted at the same vertical position on both sides of the rack.

Figure 1-6. Installing the VersaRails Rail Assemblies

front of rack
slide-assembly
mounting-bracket flange
slide assemblies (2)
Rack Installation Guide
1-13