Installing The Vcrm; Vcrm Setup - Repository Directory - HP Integrity rx1620 Installation Manual

3. Scroll down to the Security section, and disable Do not save encrypted pages to disk.
4. Click OK to save your changes and close the Internet Options dialog box.

Installing the VCRM

The VCRM can be installed during the HP SIM installation or you can install it independently.
Although the VCRM can be obtained from multiple sources (see
software" (page
HP Insight Control Management DVD and installing it independently of HP SIM.
To install VCRM from the HP Insight Control Management DVD:
1. Insert the HP Insight Control Management DVD in the DVD drive. The HP Insight Control
Management window appears.
2. Click Agree to accept the license agreement. You can click Disagree to cancel and close the
window.
3. Click the Products tab.
4. From the left pane, click the Version Control Repository Manager link. The VCRM options
appear in the right pane.
5. The VCRM installation wizard initiates the HP Insight Management Agent configuration
settings in interactive mode when the installation executable is run from the command line
or launched from Windows Explorer. After the wizard initiates, the HP Setup - VCRM
dialog box appears.
If you have a previous version of the VCRM installed on a machine, the installation wizard
detects it and initiates the upgrade with the current version displayed in the dialog box.
If you have the current version of the VCRM installed on a machine, the installation wizard
detects it and initiates the reinstallation. The HP Setup - VCRM dialog box indicates that
the software is installed and current and that you can reinstall it.
Note: If you have a newer version of the VCRM installed and you want to downgrade,
uninstall the current VCRM, reboot the machine, and run the new installation.
6. Click Install. The VCRM Setup - Repository Directory dialog box appears.
Note: You can click View Documentation to view the documentation.
7. Click Cancel to exit the setup and abort the installation.

VCRM Setup - Repository Directory

The VCRM Setup - Repository Directory dialog box enables you to specify the directory where
HP software is located so the VCRM can monitor it. The default repository directory path is
%SystemDrive%\repository. In addition, you can select to have the repository initially
populated if you are installing the VCRM for the first time.
Note: If you are upgrading or reinstalling the VCRM, the Perform an initial repository
population option is unavailable.
To change the repository directory:
1. Click Browse.
2. Select the directory where the HP software is to be stored. The path to the directory appears
in the Repository Directory field.
15)), the following example shows the steps for obtaining the software from the
Chapter 3: "Obtaining the
Installing the VCRM 31