Repository Population - Initial Installation; Configuring Automatic Update - HP Integrity rx1620 Installation Manual

3. Select Perform an initial repository population if you want to have the repository updated
with ProLiant and Integrity Support Packs. (If Perform an initial repository population is
deselected, or the option is not displayed, the Automatic Update wizard page appears next.
4. Click Next to accept the selected directory. If you selected Perform an initial repository
population on the previous dialog box, the VCRM Setup - Initial Repository Configuration
dialog box appears.
The Automatic Update dialog box enables you to schedule automatic updates for your
repository from the HP website.
Note: If you do not want to use the automatic update feature, refer to
to update the repository manually.

Repository Population - Initial Installation

1. Click Add to select a directory that contains a ProLiant and Integrity Support Pack. The
Browse for Folder dialog box appears.
2. Navigate to the directory that contains a ProLiant and Integrity Support Pack, and click OK
or Cancel to abort the selection.
All Support Packs found in the selected directory are added to the list shown in the Initial
Repository Configuration dialog box. You can choose as many directories as you want,
and then delete any Support Packs from the list you do not want to be copied.
3. Click Next. The VCRM Setup - Automatic Update dialog box appears.

Configuring Automatic Update

The Automatic Update dialog box enables you to schedule automatic updates for your repository
from the HP website.
Note: If you do not want to use the automatic update feature, refer to
update the repository manually.
To configure an automatic update:
1. Select Enable Automatic Update to automatically download ProLiant and Integrity Support
Packs and components at a specific time.
2. In the Interval between updates field, select an interval from the dropdown menu.
3. In the Day of Week field, select a day of the week to update the repository from the
dropdown menu to update the repository.
4. In the Time of Day field, select a time for the update to occur from the dropdown menu for
the update to occur.
5. Use the Set Proxy option to configure a proxy server for VCRM.
To set the proxy server:
a. Click Set Proxy. The Proxy Server Settings dialog box displays.
b. In the Server Name field, enter the name of the proxy server. Clearing this field removes
all proxy server settings, and the automatic update is performed without connecting
through a proxy server.
c. In the Port field, enter the proxy server port. For example, enter 8080. If the Server
Name field is blank, this value is ignored.
d. In the Server Login field, enter a valid login for the proxy server. Leave this field blank
if a server login is not required.
e. In the Password field, enter a valid password for the login on the proxy server. If the
Server Login field is blank, this field is ignored.
f. Click OK to save your settings or Cancel to discard the settings.
32 Installing the VCRM on Windows
Updating a repository
Updating a repository to