Hp Smh 2.2.4 Release For Hp-Ux; Hp Smh 2.2.3 Release For Hp-Ux; Hp Smh 2.2.2 Release For Hp-Ux - HP Integrity BL860c Release Note

HP SMH 2.2.4 release for HP-UX

When you run a web plugin such as Disks and File Systems (fsweb) in an HP SMH session, you see an open
browser window with a URL address similar to the following: https://hostname:2381/cpqlogin.htm. This
screen is displayed after you sign out of the session or after the session has timed out. If you leave the window
open, after a period of time, the HP SMH server times out.
If you have a session of fsweb running under HP SMH that has timed out, the open browser window showing
the HP SMH Login screen is still available. If you enter a user name and password, then click the Sign In
button, the following browser message is displayed: Page cannot be displayed.
In the open browser window with the HP SMH Login screen displayed, you will see a URL address similar
to the following: https://hostname:2381/cpqlogin.htm. Change the URL address to use
http://hostname:2301. Click the Go button, then wait for the HP SMH Login screen to appear. Enter
the user name and password and click the Sign In button.

HP SMH 2.2.3 release for HP-UX

This release corrects the 2.2.2 release problem of numerous unnecessary processes attributed to the
System Management Homepage startup daemon.
If you used or will use Bastille to configure an IPFilter-based firewall, either with the Bastille GUI or by
selecting the Sec20MngDMZ or Sec30DMZ Install-Time Security levels, you will only be able to access
System Management Homepage from the local system.
To access System Management Homepage remotely, perform these steps:
1. Add the following rules to the /etc/opt/sec_mgmt/bastille/ipf.customrules file:
2. Run bastille -b.
You must run the command with the Bastille configuration file in place at
/etc/opt/sec_mgmt/bastille/config. This directs Bastille to configure the firewall. See
the bastille (1m) manpage for details.

HP SMH 2.2.2 release for HP-UX

The following warning occurs when you use HP-UX Bastille to disable the Apache server on a system
that has an System Management Homepage instance of Apache running. The warning confirms that
the Bastille configuration you selected does not affect the System Management Homepage Apache
server. To continue to run the System Management Homepage Apache server, ignore this message;
otherwise, you can disable the System Management Homepage Apache server manually.
WARNING: The following processes were still running
even though
be turned off.
be skipped.
-k start -DSSL -f /opt/hpsmh/conf/smhpd.conf
1 0 10:33:01 ?
-f /opt/hpsmh/conf/smhpd.conf
Please note that Hewlett-Packard did not reissue the HP-UX documentation (online help, install guide,
and release notes) for this release. The December 2005 release documentation can be used for this
March 2006 release.
If you are logging in to System Management Homepage from HP Systems Insight Manager (HP SIM),
but the System Management Homepage page never appears, then you need to modify a setting in HP
SIM so that it always uses a fully qualified name in the URI. For example, in the browser you would
pass in quick proto tcp from any to any port = 2301 Flags S keep state keep frags
pass in quick proto tcp from any to any port = 2381 Flags S keep state keep frags
the corresponding service appears to
hpsmh 22993 22987
0:00 /opt/hpws/apache/bin/httpd -k start -DSSL
Bastille question and action will
0 10:33:02 ? 0:02 /opt/hpws/apache/bin/httpd
root 22987
HP SMH 2.2.4 release for HP-UX 23