How To Scan For Vcr Codes - Dish Network EZ User Manual

H S
OW TO CAN FOR
If the code for your VCR is not in the VCR Codes tables
starting on page 39, complete the following instructions to
scan for your VCR's code.
1. Make sure your VCR is on.
2. Hold
about five seconds).
3. Release
4. Press the
5. Press
will have to do this repeatedly to scan through all
codes.
: If
Note
every code in the remote control.
6. Press the
control. The
7. Press
display on your VCR. If the VCR is trying to
change channels to Channel 3 (or 4), you have
found the correct code for your VCR and you may
want to go back to page 17 to set up
VCR is not trying to change channels, go back to
step 2 to find another code.
: The way your VCR displays channel numbers
Note
may differ from the description above. See the
User's Guide that came with your VCR for more
information.
22
VCR C
until SAT
. light flashes.
TV
button.
RECALL
or until the VCR turns OFF. You
flashes eight times, you have tried
TV
to finish programming the remote
MUTE
light will flash three times.
TV
while looking at the channel number
ODES
lights turn on (it takes
TV
light stays on.
TV
. If the
118866