Dish Network 159263 User Manual page 6

Quick Setup
Program the Remote to
Control Your TV
To program the remote control to operate a
TV, you can enter an Equipment Code (see
instructions on page 3).
Or, follow the steps below to scan the
database of all Equipment Codes.
Or teach your remote the commands for
your TV (see instructions on page 9).
1
2
Turn your TV on. Press & hold the
TV Mode button until all
Mode buttons light up.
4
3
Press
Press the UP ARROW on the
POWER.
remote repeatedly
(1 press per
until your TV turns off.
second)
6
5
Press
Press the POWER button
POUND.
The TV Mode to turn the TV on and
button will
try other buttons to make
flash three times.
sure the code works. If you
want to try another code,
1.
start over from step
C-4