Controlling A Tv (Or A Second Tv) - Dish Network 129418 User Manual

text_dishpvr.fm Page 23 Tuesday, March 2, 2004 12:35 PM
C TV (
ONTROLLING A
Only the buttons described here control a TV. Some of the buttons
described heremay not control your TV. See your TV user's manual for
information about the TV's features.
You can set up the remote to control a second TV in AUX mode, the
same way it controls the first TV in TV mode. See Setting Up to
Control Other Devices on page 8.
TV M B
ODE UTTON
You must first set up the remote to control the TV. See Setting Up to
Control Other Devices on page 8. Then press the TV mode button to
set the remote to TV mode. The TV mode button will stay lit for two
seconds to show you've set the remote to TV mode. Make sure you
keep the remote in TV mode to use the buttons described in this
section.
TV/V
IDEO OR
If the TV has video input options, use this button to switch the TV
video input.
Note: Your remote control will either have the TV/VIDEO button or
the SD/HD INPUT button, but not both.
P B
OWER UTTONS
Press either POWER button to turn the TV on or off.
Note: If you set up the remote to control one TV in TV mode and an
additional TV in AUX mode, pressing the TV POWER button controls
only the TV you set up in TV mode.
S TV)
OR A ECOND
SD/HD I B
NPUT UTTON
23