Controlling Avcr; (Second Vcr Or A Dvd Player) - Dish Network 129418 User Manual

text_dishpvr.fm Page 25 Tuesday, March 2, 2004 12:35 PM
N B
UMBER UTTONS
Use these buttons to directly enter a different channel.
Note: These buttons do not change the channels on the TV if the
remote control is in Limited Mode.
C VCR ( S VCR DVD
ONTROLLING A OR A ECOND OR A
P )
LAYER
Only the buttons described here control a VCR or DVD player. Some
of the buttons we tell you about here may not control your VCR. See
your VCR or DVD player user's manual for information about the
features.
You can set up the remote to control a second VCR or DVD player in
AUX mode, the same way it controls the first VCR or DVD player in
VCR mode. See Setting Up to Control Other Devices on page 8.
VCR M B
ODE UTTON
You must first set up the remote to control the VCR or DVD player.
See Setting Up to Control Other Devices on page 8. Then press the
VCR mode button to set the remote to VCR mode. The VCR mode
button will stay lit for two seconds to show you've set the remote to
VCR mode. Make sure you keep the remote in VCR mode to use the
buttons we tell you about here.
You must put the remote in VCR mode to set it up to control a DVD
.
player. Put the remote in VCR mode to use it to control a DVD player
25