Appendix F: Battery Endurance Tests (Typical); Appendix G: Changing Audix Mic Capsules (Sw70-H) - SABINE SW71-NDR User Manual

Appendices

Appendix F: Battery Endurance Tests (Typical)

NiMH AA Battery (SWBC1, Typical)
Appendix G: Changing Mic Capsules (SW70-H)
Sabine's Mic SuperModeling™ function requires a baseline characteristic for the capsule in use. Therefore, after changing
capsules, you will need to "tell" the transmitter which capsule is now attached. NOTE: this is only necessary when the capsule
is changed.
1
Open the handheld mic's battery door.
2
While holding down the SELECT button, turn on the mic. Continue to hold the select button for
about 3 seconds, then let go.
3
One of the screens at right will appear in the transmitter LCD — showing the currently assigned
capsule.
4 Using the transmitter control up/down buttons, select the capsule you now have attached. Wait a
few seconds until the LCD cycles through the transmitter firmware version numbers and returns to
the default display (channel number).
5 IMPORTANT: In order for the new capsule selection to be saved, you must now edit the RF channel
selection. To do this, press the Select button, then use the up/down buttons to change the RF
channel. Wait a few seconds to allow the transmitter screen to return to the default display. NOTE:
you can return to the original channel by repeating the channel selection process.
Sabine 2.4 GHz Smart Spectrum ® Wireless
NiMH C Battery (SWAA2, Typical)
56
Audix OM-3
Audix OM-5
Voice Technologies