Table of Contents
Advertisement
•
RF Scan and Report, which measures strength for each of the 70 trans-
mission channels, and displays a hierarchical ordering of the clearest,
strongest channels to use during system setup and operation. You can
print a copy of the scan results.
•
Additional memory options. In addition to saving presets in receiver
memory, channel configuration settings can be saved to and recalled
from disc or hard drive. All parameter settings made with the remote
control, including adjustments that are not accessible from front panel
controls (e.g., compressor knee and release), are saved with presets.
All software settings stored for each of the 10 presets, including set-
tings not accessible from the front panel, will be loaded whether pre-
sets are recalled by remote control or from the front panel. Note that all
settings made in Off-line/Edit mode can be saved and applied in online
operation.
•
Ability to print a report of all parameter settings, creating hard copy
documentation.
•
A receiver channel output mute button.
•
The ability to custom name each RF channel and receiver. This name
will be displayed in the software only.
•
Display of important transmitter status information. In addition to
duplicating the battery charge status, battery warning message, and
transmitter on/off/mute status from the front panel display, the Remote
Software displays the number of hours the battery has been in use, the
frequency midpoint (in GHz) of the transmission channel chosen, the
transmitter pad and low cut filter settings, and a warning indication in
the case of low RF signal strength. For handheld transmitters, the
software display also shows the type of mic capsule in use.
•
Improved and expanded operational displays. In addition to organiz-
ing all front panel displays on a single computer screen, the Remote
Software also displays the exact frequency, width, and depth of FBX
filters. The frequency response curve resulting from combined filter
settings (including FBX, parametric, and high and low cut) is graphically
displayed in the software. Frequency response changes imposed by
choosing various microphone models are also shown.
•
Customizable front panel lock settings. Software control allows you to
program selective access to front panel controls to be made available
once the Remote Control is disconnected. Customizable front panel
lock settings are saved and recalled as part of each receiver's settings.
All software-only accessible settings are saved with presets. Careful
programming enables some powerful operational features — for ex-
ample, locking Program Save but enabling other front panel controls
(including Program Load) will let front panel users update settings tem-
porarily, yet reload the original settings at the push of a button. Such a
temporary adjustment would not permanently alter a setup designed to
work in most situations, but would allow tweaking to address unusual
situations.
BEFORE DISCONNECTING RECEIVER FROM COMPUTER
Quit all SWM7000 Software functions and close software BEFORE disconnecting the receiver connection to you computer.
Failure to do this may cause the receiver to lock up. In case of receiver lock up, restart receiver.
Remote Control Operation
WARNING:
39
Sabine 2.4 GHz Smart Spectrum
LIT-SWM7000-OG-EN-070615.pmd - rr
®
Wireless
Hide quick links:
Advertisement
Table of Contents
