SABINE SW71-NDR User Manual page 45

allows you to copy your settings for all functions to any num-
ber of other channels. Select the channel you want to copy
from by first selecting the receiver, then the channel. From
the Options Menu, choose Copy Parameters. You will see
your selected channel displayed in a red field labeled "Copy
Parameters From." Select the channels you want to copy to
from the Available Channels list, then check the boxes of
the parameters you wish to copy. Once you are sure of your
selections, hit Copy Now and your settings will be pasted to
the selected channels. Note that RF channel selections
cannot be copied.
Reset Parameters. This window allows you to selectively
reset any of the functions in your receiver. Choose Reset
Parameters from the Options Menu, then check the boxes
of the functions you would like to reset to their default set-
tings. In order to reset FBX filters, use the dedicated button
on the Command View. If you wish to load the factory default
for the entire receiver, choose Preset 00 from the Program drop-down on
the Command View and select the Load button.
BEFORE DISCONNECTING RECEIVER FROM COMPUTER
Quit all SWM7000 Software functions and close software BEFORE disconnecting the receiver connection to
you computer. Failure to do this may cause the receiver to lock up. In case of receiver lock up, restart receiver.
Remote Control Operation
WARNING:
45
Fig. 13L Copy Parameters window
Fig. 13m Reset Parameters window
Sabine 2.4 GHz Smart Spectrum
LIT-SWM7000-OG-EN-070615.pmd - rr
®
Wireless