Antenna Distribution Amplifier Connection - SABINE SW71-NDR User Manual

11.3. Antenna Distribution Amplifier Connection

1
Connect receiver Antenna 1 input to any RF
Output 1 connector on the SWA6SS.
.
Receiver Antenna Distribution
Amplifier (SWA6SS)
2
Connect any receiver Antenna 2 to any RF
Output 2 connector on the SWA6SS.
Receiver Antenna Distribution
Amplifier (SWA6SS)
3
Continue with remaining receivers
Fig. 12a: SWA6SS Antenna Distribution Amp Back Panel
SWA6SS
Antenna
Distribution
RF Output 2
Amplifiers
Antenna 2
SWM7000
Series
Receivers
IMPORTANT
!
Active Electronics Antenna
Sabine wireless receivers provide
antennas with active electronics. The
inputs to the receiver & antenna dis-
tributor amplifier have phantom ower
available for this purpose.
DO NOT SHORT TO GROUND
IMPORTANT
!
Antenna Cabling Impedence
must be 50 Ohm.
35
Multiple Systems Operation
To Extension
Antennas
RF Output 1
Antenna 1
!
!
Sabine 2.4 GHz Smart Spectrum
®
Wireless
LIT-SWM7000-OG-EN-070615.pmd - rr