Dish Network DuoDVR ViP 722_TOC User Manual page 113

4
Select OK to begin recording now or Options to customize your recording settings. If you
selected Options, see Recording Options on page 60 for your choices.
5
Repeat step 1.
6
Press RECORD. Customize your options as described on page 60.
7
Press DVR twice on the remote control. The My Recordings screen will open. You should
see the two programs that are recording indicated by the red dot next to the listings.
8
Select a program that you recorded earlier (one that is not recording now), then select
Start or Start Over. You should now be watching a pre-recorded program while the
receiver is recording the other two programs.
Recording Events without Record Plus
While in Dual Mode with Record Plus disabled, you can set up the satellite receiver to
record one program from both locations (TV1 and TV2) at the same time.
1
Find a current
program
1
Find a program to watch.
2
Press RECORD. A message will display asking whether you want to record the remainder
of the program. Select OK to begin recording now.
3
Press DVR twice. The DVR Event screen will open. You should see the program that is
recording indicated by the red dot next to the listings.
4
Select a program that you recorded earlier (one that is not recording now), then select
Start or Start Over. You should now be watching a pre-recorded program while the
receiver is recording the other program.
Digital Video Recording
Recording While Watching Different Programs
DVR
program and select
Start (or Start Over)
18hr 41min Avail
Today 3:04
The Brady Bunch 0:34
59