SABINE 2007 NAVIGATOR Manual page 17

S F : O
ECTION IVE PERATING THE
Crossover
· FTRL: Choose the type of low frequency filter (high pass).
Types can be Buttwrth (Butterworth), Link-Ri (Linkwitz-Riley) or
Bessel.
· FRQL: Filter cut-off frequency of low frequency crossover
point (high pass). Ranges from 20 to 20,000Hz in either 1Hz
steps or 1/36 octave steps. Select frequency resolution in the
Global Parameters menu.
· SLPL: Filter Slope of low frequency crossover point (high
pass). Ranges from 6 to 48dB/octave in 6dB/octave steps. If the
selected Filter Type is Linkwitz Riley, the available slopes are
12 / 24 / 36 / 48 dB/octave.
· FTRH: Choose the type of high frequency filter (low pass).
Types can be Buttwrth (Butterworth), Link-Ri (Linkwitz-Riley) or
NAV240, 360, 480
Bessel..
LCD Display has
· FRQH: Filter cut-off frequency of high frequency crossover
only 2 lines. Use
point (low pass). Ranges from 20 to 20,000Hz in either 1Hz
Cursor key to
steps or 1/36 octave steps. Select frequency resolution in the
access all
Global Parameters menu.
parameters in
· SLPH: Filter Slope of high frequency crossover point (low
each window
pass). Ranges from 6 to 48dB/octave in 6dB/octave steps. If the
selected Filter Type is Linkwitz Riley, the available slopes are
12 / 24 / 36 / 48 dB/octave.
Compressor
· THRESH: Compressor Threshold. Ranges from -20 to
+20dBu in 0.5dB steps.
· ATTACK: Attack time. Ranges from 0.3 to 1ms in 0.1ms
steps; from 1 to 100ms in 1ms steps.
· RELEASE: Release time. Can be set at 2X, 4X, 8X, 16X or
32X the attack time.
· RATIO: Set compression ratio, 1:1 to 40:1 (Limit).
16
N
AVIGATOR
NAV4802 & NAV8802
NAV4802 & NAV8802
NAV240, 360, 480
NAV240, 360, 480