Table of Contents
Advertisement
FBX Feedback Exterminator
FBX
See Section 5.6
for a complete de-
scription of how to
operate the FBX
Feedback Exter-
· EQ#: Selects one of the 8 available FBX filters.
minator
· TYPE: Choose Fixed for more gain before feedback, Dynamic
for control of new feedback during the show. See section 5.5 for
a complete guide to using the FBX function.
· LVL: Shows level in dB of the FBX filter (not editable).
· FREQ: Shows center frequency of the FBX filter (not editable).
· BW: Shows the width of the FBX filter (not editable).
FBX-Global Parameters
· LOCK: This refers to Fixed filters only, which by definition
already are fixed in their centerpoint position. Locking prevents
the filter from getting deeper. Locked is the recommended
setting. Ready Mode automatically locks fixed filters.
· BYPASS: Bypasses all FBX filters on this Input channel. On
indicates bypass; Off indicates FBX is active.
· RSTDYN: Reset Dynamic FBX filters. Turning to on toggles
the reset function.
· DEPTH: Sets maximum depth of all FBX filters on this input
channel. Range is 0 to -84dB.
· WIDTH: Sets default width of all FBX filters on this input
channel. Range is 0.01 to 1.00 octave.
· SENS: Sets the Sensitivity of the FBX algorithm to the
difference between music and feedback. Range is 1-5.
· PERS: Sets persistence - how long feedback can persist
before a filter is set. Range is 1-5.
· Factory Defaults are recommended for Sensitivity, and Persis-
tence settings.
S
F
: O
ECTION
IVE
NAV4802 & NAV8802
NAV240, 360, 480
NAV4802 & NAV8802
NAV240, 360, 480
N
PERATING THE
AVIGATOR
Navigator2 Op Guide 071010 KJS.pmd
13
Hide quick links:
Advertisement
Table of Contents
