Axis SPIN AX-2200 - V2 Manual page 10

assembly by the other.
3. Remove inner cutter assembly by
pushing down and turning counter
clockwise the srew knob in the center, fig.5
then pull upwards away from the outer
cutter assembly.
4. Clean hairs off with brush supplied.
fig.6
To maximize shaving comfort and
closeness, periodically remove the
head assembly to determine if your
shaver needs cleaning, particularly if
fig.7
Axis Spin |1| English
you have a heavy beard and use the shaver dairy.
If you routinely check the amount of shaver hairs
under the head and clean the entire head assembly
when necessary, your shaver will always run at peak
performance. After cleaning, replace the inner cutter
assembly back into place.
imPORTAnT! Make sure that the center knob
is locked into place by pushing down and turning
clockwise.
5. After cleaning, always replace the plastic head
guard to protect the floating heads.
Axis Spin |1| English