Disarming The Vrs - Clifford MATRIX 1 Owner's Manual

➜

disarming the VRS

Take the time to familiarize yourself with the VRS triggering se-
quence and the disarm procedure. It is important to recognize
and identify the VRS trigger sequence and know how to disarm
it in case of accidental activation.
Once the VRS is armed, it does not disarm automatically. You
must disarm it the next time you operate the vehicle. You must
disarm it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
1. Turn the ignition on.
2. Press
one second. The lights will flash
and the siren will chirp twice.
If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the transmitter will not
disarm VRS.
To disarm the VRS during a VRS trigger sequence:
1. Turn the ignition on.
2. Press the Valet switch the pre-
programmed number of times to
disarm the VRS system.
© 2001 directed electronics, inc.
on the transmitter for
DRW-35
25