Disarming; Disarming Without A Transmitter - Clifford 22CX User Manual

427 series

Hide thumbs Also See for 22CX:

Table of Contents

disarming

To disarm the system, unlock the doors using your factory keyless trans-

mitter. The horn will sound twice, and the parking lights will flash

twice. If the horn sounds either four or five times when disarming, refer

to the Diagnostics section of this guide. This is called Tamper Alert.

This feature allows you to override the system without the transmitter

should it be lost, damaged or disabled. To do this, you must have the ve-

hicle's ignition key and know where the integrated LED/Valet

located. The Valet

Interrupteur à bouton

poussoir Valet intégré

au témoin lumineux

Turn the ignition to the "run"position.

Press

LED/Valet

After a few seconds the LED will stop

flashing and the vehicle should start. If it does not, you may have waited

too long. Turn the ignition off and try again.

n n o o t t e e : : The setting for the number of times the integrated

LED/Valet® switch must be pressed is set in the

Programming Section of this guide.

switch is activated by pressing the LED status indicator.

and

release

switch, within 10 seconds.

Témoin lumineux à

the

integrated

switch is

DRW-35

Table of Contents