Vrs Triggered Sequence - Clifford MATRIX 1 Owner's Manual

Hide thumbs Also See for MATRIX 1:
Table of Contents

Advertisement

note: If the VRS system is armed while operating the
vehicle and not disarmed prior to leaving the vehicle, it is
still armed and will trigger the next time the vehicle is driven.

VRS triggered sequence

after the last door has closed, the system's LED
Fifteen seconds
status indicator will begin flashing. This delay is intended to
allow you time to distance yourself from your vehicle in the
event of a carjacking.
Forty-five seconds later
ing lights begin flashing. This time could be used to notify au-
thorities that your vehicle has been hijacked, and tell them what
the VRS will do next.
after the siren chirps begin, the siren's output will
Fifteen seconds
change to a continuous blast.
From this point on, when the ignition key is turned off, the VRS
will immediately turn on the starter interrupt. This will prevent
the vehicle from being restarted, thus immobilizing it at that spot.
after the constant siren output begins, the flashing
Three minutes
parking lights and the siren will stop. The starter interrupt will
remain active until the system is disarmed. If the door is opened
or the ignition is turned off and on in an attempt to restart the
car, the siren and light flashing will begin again.
24
, the siren begins chirping and the park-
© 2001 directed electronics, inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents