Transmitter Functions; Standard Configuration - Clifford CONCEPT 470 Manual

transmitter functions

This system uses computer-based code learning to learn the transmit-
ter buttons. This makes it possible to assign any transmitter button to
any system function. The transmitter initially comes programmed with
standard configuration, but may also be customized using the CliffNet
Wizard PC program. The buttons in all of the instructions in this man-
ual correspond to a standard configuration transmitter.

standard configuration

Button
The arming, disarming, and panic function are controlled by this button.
Button
The trunk release or accessory output A is controlled by this button.
Button
If installed, Remote start is controlled by this button.
Button
Silent arm/disarm is controlled by this button.
and
Accessory B is controled by these buttons.
then
These buttons activate SmartWindows (If installed. Additional prats
required).
© 2 0 0 6 d i re c t e d e l e c t ro n i c s
Buttons
Buttons
5