Canon 2925B002 On-Screen Manual page 284

Scanner Stops Operating during Scanning, or "There is not enough memory."...
>
On-Screen Manual Scanning Guide
during Scanning, or "There is not enough memory." Message Is Displayed
Scanner Stops Operating during Scanning, or "There is not
enough memory." Message Is Displayed
Check 1: Reduce the resolution or output size and scan again.
Check 2: Reduce the number of frames to scan or apply Image Settings
(such as Backlight Correction) only to frames that require corrections.
Check 3: You may be scanning with ArcSoft PhotoStudio.
Scanning data size is limited with ArcSoft PhotoStudio.
Scan again using an application other than ArcSoft PhotoStudio.
> > Problems with Scanning Film
Troubleshooting
Sayfa 284 / 302 sayfa
> Scanner Stops Operating
Page top