Scan Tab
Important
This setting is not applied when scanning with the ScanGear (scanner driver) screen displayed.
Advanced Mode Settings
Select the Enable 48/16 bit Output checkbox to display Color(48bit) in Color Mode on the Advanced
Mode tab. When Select Source is Film, Grayscale(16bit) will also be displayed. This checkbox is not
selected by default.
Note
When Color(48bit) or Grayscale(16bit) is selected for Color Mode, deselecting this checkbox
changes Color(48bit) to Color and Grayscale(16bit) to Grayscale.
Some applications cannot receive images scanned in Color(48bit) or Grayscale(16bit), or may
close when such images are received.
Sayfa 226 / 302 sayfa
Page top