Canon 2925B002 On-Screen Manual page 20

Placing Documents
scanned properly.
Placing Multiple Documents
Allow 3/8 inches (1 cm) or more space between
the edges of the Platen and documents, and
between documents.
Note
You can place up to 10 documents.
Positions of slanted documents (10 degrees
or less) are corrected automatically.
Placing Film
35 mm Film Strips
1.
Load the film into the Film Guide.
Open the film holder and place the film on the
Film Guide, with the front side of the film (the
side on which images appear correctly) facing
down.
Note
Make sure that the spaces between frames
are aligned with the white lines on the
holder.
2.
Place the Film Guide on the Platen.
Align the tabs on the Film Guide with the FILM
marks on the Platen.
Mounted Slides
1.
Remove the frame for film strips.
2.
Place the Film Guide on the Platen.
Align the tabs on the Film Guide with the
FILM marks on the Platen.
3.
Load the film into the Film Guide.
Place the front side of the film (the side on
which images appear correctly) facing
down.
Sayfa 20 / 302 sayfa