Canon 2925B002 On-Screen Manual page 268

"Select the program to launch for this action" Is Displayed When a Scanner B...
>
On-Screen Manual Scanning Guide
this action" Is Displayed When a Scanner Button Is Pressed
"Select the program to launch for this action" Is Displayed
When a Scanner Button Is Pressed
Check 1: If the software program is not installed, install it from the Setup
.
CD-ROM
Install the software program following the procedure in the printed manual: Quick Start Guide.
Check 2: Set to start MP Navigator EX when a Scanner Button is pressed.
Scanner Button Settings
> >
Troubleshooting Problems with Scanning > "Select the program to launch for
Page top
Sayfa 268 / 302 sayfa