Scanning Film in Advanced Mode
>
On-Screen Manual
Scanning Guide
Film in Advanced Mode
Scanning Film in Advanced Mode
In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.
when scanning documents.
This section explains how to scan film.
1.
Place the film on the Platen, then start ScanGear (scanner driver).
Placing Film
Starting ScanGear (Scanner Driver)
2.
Click Advanced Mode.
The Advanced Mode tab appears.
Note
Settings are not retained when you switch between modes.
3.
Set Select Source, Film Size and Color Mode.
Note
See "
Input Settings
4.
Click Preview.
Preview image appears in the Preview area. Images are cropped (scan areas are specified)
automatically according to the film size. Select the checkboxes of the frames you want to scan.
>
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
" for details on Select Source, Film Size and Color Mode.
Sayfa 170 / 302 sayfa
> Scanning