Motion Detect - TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera Network User Manual

4.7 Motion Detect

The Motion Detect menu contains the command and option that
allow you to enable and set up the motion detection feature of the
camera. The camera provides two detecting areas.
To enable the detecting area, select Window 1 or 2 from the pull-
down list, and then select Enable. When the detecting area is
enabled, you can use the mouse to move the detecting area and
change the area coverage.
 Name: Assign a name to the detecting area.
 Threshold: Move the slide bar to adjust the level for
detecting motion to record video.
- 52 -