Table of Contents
Advertisement
4.7 Motion Detect
The Motion Detect menu contains the command and option that allow you
to enable and set up the motion detection feature of the camera. The
camera provides two detecting areas.
To enable the detecting area, select Window 1 or 2 from the pull‐down list,
and then select Enable. When the detecting area is enabled, you can use
the mouse to move the detecting area and change the area coverage.
- Name: Assign a name to the detecting area.
- Threshold: Move the slide bar to adjust the level for detecting
motion to record video.
- 41 -
Advertisement
Table of Contents
