Motion Detect - TRENDnet TV-IP262P User Manual

TRENDnet User's Guide
- Share: Assign the folder on the Network Storage server to share the files to
users.
- Path: Assign the path for uploading the files on the Network Storage server.
For example, Test.
- User Name: Enter the user name to login into the Network Storage server.
- Password: Enter the password to login into the Network Storage server.
- Split By: When the file is too large to upload smoothly, use this option to
split it by selecting File Size or Recording Time.
- When Storage Full: Select Stop Recording or Recycle - Delete Oldest
Folder when the storage space on the Network Storage server is full.
- Encode Format: Select MPEG4 or H.264 as the encode format while
recording.
- File Format: Select MP4 or AVI as the file format while recording.
Event Server Setting >> Instant Message
The camera supports the Jabber IM service, so that you can send an instant message
once you have a Jabber account. For more information of Jabber, please visit the
Jabber Website at: http://jabber.org/Main_Page.
using google talk.
 Instant Message
- Jabber ID: Enter your user ID to login into the Jabber IM service.
- Jabber Password: Enter the password to login into the Jabber IM service.
© Copyright 2012 TRENDnet. All Rights Reserved.
The information shows above is
- Manually Specify Server Host/Port: Select the Enable option to manually
configure the Jabber server settings.
- Jabber Server Address: Enter the Jabber server address manually.
- Jabber Port: Assign the Jabber port manually in the text box.
- Encrypt Connection: Select the Enable option to secure the connection.
- Encrypt Authentication: Select the Enable option to secure the connection.
- Receiver: Enter the receiver's information.
- Message: Enter the message that is to be sent.

Motion Detect

The Motion Detect menu contains the command and option that allow you to enable
and set up the motion detection feature of the camera. The camera provides three
detecting areas.
To enable the detecting area, select Window 1/2/3 from the pull-down list, and then
select Enable. When the detecting area is enabled, you can use the mouse to move the
detecting area and change the area coverage.
Name: Assign a name to the detecting area.

Threshold: Move the slide bar to adjust the level for detecting motion to record

video.
TV-IP262P
26