ScanSoft OMNIPAGE DIRECT 2 FOR WINDOWS Installation Manual page 12

Step 5 Select Parts of a Page
Step 5 Select Parts of a Page
10 How to Scan Text
If you highlighted Partial Page, an image of your page and a set of tools will
appear after the page is scanned. The tools let you draw zones around
parts of the page, order the zones for recognition, and zoom in or out.
Zoom in
Start or stop
Zoom out
recognition
Draw zones
Order zones
Erase zones
1 Click on the Draw zones tool and then enclose each area you want
recognized with a selection box by holding the mouse button
down and dragging the mouse.
Zones will be recognized in the order you select them unless you
use the Order zones tool (the # symbol). To adjust a zone, first
select it by clicking on the Draw zones tool and then clicking on
the zone. Then move the mouse pointer to a selection box handle,
hold the mouse button down, and move the mouse.
The window will look like this:
the
recognition
and reset
process.
Open the
Options
dialog box.
Stop
zones.
Rotate the
image 90°,
180°, or 270°.