Step 7 (Optional) - Directed Electronics Nissan Owner's Installation Manual

➜

step 7 (optional)

Auxiliary Channel
When the
RED/WHITE (H1/14) wire will supply (-)200 mA output as
long as the transmission continues. This is often used to operate
a trunk/hatch release or other relay-driven functions.
i i m m p p o o r r t t a a n n t t : : Never use these wires to drive anything but a
relay or a low-current input! The transistorized output
can only supply (-)200 mA of current. Connecting
directly to a solenoid motor, or other high-current device
will cause it to fail.
note: If the on-line wiring information shows a 5-wire
trunk release system, please contact READY REMOTE
Technical Support for further instructions.
30
button is pressed for 1.5 seconds the
© 2006 directed electronics.