Directed Electronics Nissan Owner's Installation Manual page 37

Directed electronics ready remote owner's installation guide
Table of Contents

Advertisement

step 10
Testing the system
With all the previous steps completed, the operation of the
system can now be tested.
Close all the doors and press the
button on the transmitter
to lock the doors, the system should flash the parking lights
once. Press the
button on the transmitter to unlock the
doors. The parking lights should flash twice and the factory
disarm output will activate (if connected).
This completes the testing, if all functions do not work correctly
check your wiring against the manual and verify all connections.
If you still experience problems contact READY REMOTE
Technical Support at 1 1 - - 8 8 0 0 0 0 - - 4 4 7 7 7 7 - - 1 1 3 3 8 8 2 2 .
33
© 2006 directed electronics

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ready remote 21944

Table of Contents