Download Print this page

Dacor ERV3615 Planning Manual

36” wide, high extension slim raised vent
Hide thumbs Also See for ERV3615:

Advertisement

Document # PG08-004
5/16" (8 mm)
thick stiffener
across back
3"
(7.6 cm)
1 15/16 "
(4.9 cm)
(50.8 cm)
(9.5 cm)
1 1/8"
(2.9 cm)
DImENSIoNS SIDE VIEW
Model no.
a
36"
ERV3615
(91.4 cm)
** Includes power supply requirements for external blower
Specifications subject to change without notice.
36" Wide, High Extension
Slim Raised Vent
2 3/16"
(5.6 cm)
2 1/8 "
Top cap with
(5.4 cm)
3/16"
(5 mm)
9/16"
(1.4 cm)
2 9/16"
(6.5 cm)
Vent shown
(38.1 cm)
in raised
position
20"
30 1/4"
(76.2 cm)
(76.8 cm)
to
3 3/4"
37 1/4"
(94.6 cm)
B
requirement**
Three prong electri-
cal outlet connected
33 3/8"
to 120 Vac, 60 Hz.,
84.8 cm)
15 Amp. grounded,
dedicated, circuit
ERV3615
vent down
A
15"
B
30"
6"
(15.2 cm)
Motor
cover
Front of unit
Adjustable
anchor legs
DImENSIoNS FRoNt VIEW
nOTES:
Circuit
1.
The maximum installed height must not exceed the
maximum specified countertop height of cooking
appliances.
2.
install these raised vents only with approved Dacor
appliances. See the planning guide for the particular
appliance for proper applications and cutout information.
3.
This appliance must be install in conjunction with a
single Dacor approved remote or in-line blower. See
following pages for approved blowers.
www.Dacor.com
PLANNING
warning
Observe all governing codes and ordinances
during planning and installation. Contact your
local building department for further information.
This appliance must be installed in accordance
with the accompanying installation instructions.
All tolerances: ±1/16" (±1.6 mm)
unless otherwise stated
2 1/8 " (5.4 cm)
Product
data label
28" 3 prong
grounded
power cord
Revised 01/21/11 Page 1/3
GUIDE
3/8"
(1.0 cm)
Top cap - side view
8.4
Phone: (800) 793-0093

Advertisement

loading

Summary of Contents for Dacor ERV3615

  • Page 1 36” 33 3/8" ERV3615 to 120 Vac, 60 Hz., install these raised vents only with approved Dacor (91.4 cm) 84.8 cm) 15 Amp. grounded, appliances. See the planning guide for the particular dedicated, circuit appliance for proper applications and cutout information.
  • Page 2 ERV3615 Document # PG08-004 Revised 01/21/11 Page 2/3 36” Wide, High Extension PLANNING Slim Raised Vent GUIDE Duct work Design Tips For example, for a raised vent system using 3 ¼” X 10” rectangular duct, two (2) 3 ¼” X 10” 90° elbows, a 3 ¼” X 10” rectangular to 10”...
  • Page 3 ERV3615 Document # PG08-004 Revised 01/21/11 Page 3/3 36” Wide, High Extension PLANNING Slim Raised Vent GUIDE All tolerances: ±1/16” (±1.6 mm) unless otherwise stated ExHAUSt oUtLEt LocAtIoN oPtIoNS FRoNt VIEW SIDE VIEW 6 1/2 ” (16.5 cm) 2” X 16”, connects to 1 1/8 ”...