PDG-DWL100 Basic Serial Command Specifications
6.4 Operation Requirements
The Functional Execution Commands are limited, when the projector is in the status below.
(The Status Read Commands are available in following status.)
Projector Status
In Standby mode
Cooling Down in process
Cooling Down in process due to abnormal
temperature
In Abnormal Temperature
Note) In the above status, the projector returns [ACK] [CR] even if it projector receives other
commands.
Available Functional Execution Commands
C00: POWER ON
NONE (No Execution)
NONE (No Execution)
NONE (No Execution)
8/19