Image Mode User 2 Command; Image Mode Classroom Command; Image Mode Blackboard Command; Menu On Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Basic Serial Command Specifications

6.21 Image mode User 2 Command

COMMAND "C16" [CR]
Set Image mode to User 2.
This command changes Image mode immediately into User 2.
Detail
The projector shows the OSD "Image mode User 2" on the screen at receiving
the command.
Acceptable
Response
Unacceptable

6.22 Image mode Classroom Command

COMMAND "C17" [CR]
Set Image mode to Classroom.
This command changes Image mode immediately into Classroom.
Detail
The projector shows the OSD "Image mode Classroom" on the screen at
receiving the command.
Acceptable
Response
Unacceptable

6.23 Image mode Blackboard Command

COMMAND "C18" [CR]
Set Image mode to Blackboard.
This command changes Image mode immediately into Blackboard.
Detail
The projector shows the OSD "Image mode Blackboard" on the screen at
receiving the command.
Acceptable
Response
Unacceptable

6.24 MENU ON Command

COMMAND "C1C" [CR]
Show the main menu of On Screen Display.
Detail This command works the same as the "menu" key of the remote control, but it
does not cancel out the menu.
Acceptable
Response
Unacceptable

6.25 MENU OFF Command

COMMAND "C1D" [CR]
Cancel out the main menu of On Screen Display.
Detail This command works the same as the "menu" key of the remote control, but it
does not call up the menu.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
12 / 17